Epoxy-modified
silicone resin IOTA E-30
Characteristics and application:
This product has a relatively good resistance to high and low temperature,
hydrophobic moisture resistance and good electrical insulation properties, arc
resistance corona performance. Its weather resistance and chemical stability,
corrosion resistance is also very good.
This product is widely used as high-temperature anti-corrosion coatings (≥500℃) , can be completely
cured two-component at room temperature, the property will be better after
roast solidification. It could also be used as H grade insulating material.
Data:
Appearance: Light yellow transparent liquid, allowing
opalescence, no mechanical impurities
Solid content: 50±1%
epoxy value: 0.02～0.07
Viscosity: 20-60 seconds (No 4 cup)
Notes:
The diluting solvent used in this product should not
contains water, pyridine sulfur-containing compounds and impurities, otherwise
it will affect the resin film adhesion, dry and other properties.
There will be a lot of xylene and other flammable,
toxic solvents evaporate during the production process, we should pay special
attention to strengthening the field of ventilation, attention to fire safety,
strict cut off the source of fire. The operator should pay attention to labor
protection.
The processing equipment, utensils must be clean
during the production process. To prevent dust、foreign
matter and water.
The products such as acid、alkali、salt of
organic acid amine compounds has Accelerate the solidification effectiveness
for this product, and will influence the heat resistance and electrical
properties. So, this product should be isolated with those products when
storing.
Storage: This product should
be stored in ventilated, cool, dry place to prevent direct sunlight exposure;
to prevent serious pollution of acid, lye, and should be cut off from sources
of ignition away from heat, the product storage period is six months.
Packing: 25kg white iron drum, 200kg white
iron drum
