IOTA 10501 release agent is compound by a variety of wax, and contents high solids. It is mainly used in car seats, headrests, toys and other PU Rebound.

IOTA 10701 release agent is compounded by a variety of silicones. It has high solid content, and is mainly used for the separation of the PU elastomer resin during molding and curing. It has good release properties. It is used in the PU elastomers, integral skin, shoes, car shock absorbers and other PU product parts.

IOTA 55-NC is another type of IOTA 44-NC with fast evaporation and low odor. The main ingredients of IOTA 55-NC is similar to IOTA 44-NC.Eexcept that there is a litter solvent changed. IOTA 55-NC is your best choice under the application that requires the release agent not to transfer to the surface of the article. This semi-permanent release agent that has non-transfer and the surface of Molds forms a coating layer by a chemical bond, which is stable under most molding temperature conditions. IOTA 55-NC can be used for these materials：Epoxy resins, unsaturated polyester resins, thermoplastics, adhesives and plastics rotational molding.

Automatic crusting matte release agent IOTA 1303

PU shoes release agent IOTA 1400 series

This product is an emulsion type silicone-release agent (release agent), it can be diluted with water to 100-150 times, widely used in EVA rubber Release with good stability.

Silicone rubber release agent IOTA VM-34

This product is high temperature resistant, good lubrication performance. This product release of high efficiency, less dosage, then these can paint and gilt; The oil phase can withstand mold temperature more than 300℃(smokeless, components are not destroyed, not to be carbonized in the mold, no residue).

This product release efficiency is high and the emulsion stability is good; After releasing, the material can be coating, paint and gilt; The oil phase can withstand the mold temperature (no smoke, the composition is not destroyed, not to be carbide, no residue on the mold).