Product number：IOTA 2613 

Product name：Wig shiny oil

Structure or component

Specially modified polydimethylsiloxane oil pre-emulsion of high concentration.

Features

This product is containing polar group silicone big chain molecules group, has a special softness and elasticity, make the processed soft, smooth, bright ,with good elasticity and extensibility, the smoothing effect is significant.

Physical and chemical data and indicators

Appearance ：Transparent to translucent high-viscosity liquids

pH value ：5~6

active ingredient ：80%

Ionic type ：Weak cationic / nonionic

Applications

This product is suitable for processing wool fabric, also apply to blended fibers whose main component is wool such as wool acrylic blended, wool is a new generation of high-grade special softener.

This product can also be used in shampoo, hair care products (such as combo shampoos, conditioners, etc.) of supplies silicone additive.

Diluted

Formulated IOTA 2613 (80% content) as a IOTA 2613 working solution (30% content), the amount of water required is calculated: B = (A × 80% / 30%) - A; wherein: A = IOTA 2613 (80% stock solution); B = amount of water needed; X = IOTA 2613 (30% working solution).

Take 100 kg IOTA 2613-80 formulated as a IOTA 2613 -30 for example: water B = (100 × 80% / 30%) - 100 = 166.67 kg

Precautions

1.must diluted with cold water (not exceeding 30 ℃), should be added in portions. After each addition of water, should stir evenly, without lumps (divided into 4-5 times the amount of water is added, every 40 kilograms).

2.application requirements, if desired finished product pH value was slightly acidic, adding an appropriate amount glacial acetic acid in the last.

3.If you want to get the finished product pH value was slightly alkaline, then in the diluted process need not add glacial acetic acid. Finally, make up water is blue fluorescence was slightly transparent to translucent micro emulsion or micro emulsion.

4.containers used to dilute the IOTA 2613 must be kept clean. The container when not in use should soak in water to avoid the container wall attached micro emulsion dried cured film, and pollution next diluted micro emulsion.

Packing

The product packaging specification is a 50Kg plastic drum or according to user requirements.

Storage and transportation

5 ~ 30 ℃ sealed storage, transportation, storage should avoid heat and freezing, the shelf life of six months.

The product belongs to non-flammable non-dangerous goods.