IOTA SLT 6BA is a one component, neutral curing, ready -to-use silicone elastomer. It cures quickly at room temperature in the presence of air moisture to give a flexible and strong seal.

IOTA SLT 3S is a one-component, moisture-cured silicone sealant, acidic curing, which contains fungicide. It cures at room temperature to form a flexible, medium modulus watertight joint for general sanitary sealing.

IOTA SLT 3RG is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 20 % throughout a wide temperature range; resistance to severe weathering is good.

IOTA PDMS 47V5000 - 47V500000 (viscosities 5 000 - 10 000 - 12 500 - 30 000 - 60 000 - 300 000 – 500 000) are dimethylpolysiloxane polymers with linear chains.

IOTA PDMS 47V50 - 47V1000 are straight chained polydimethylsiloxane fluids.

IOTA SLT 3OG is a one-component silicone sealant which when exposed to atmospheric humidity, cures rapidly to form a permanently flexible and extremely durable weather tight seal. The cured sealant will accommodate joint movement of maximal amplitude of 20 % throughout a wide temperature range; resistance to severe weathering is excellent.

IOTA PDMS 47V3 - 47V10 are a low viscosity polydimethylsiloxanic fluids.

IOTA D5 is volatile polymethylsiloxane fluids, Mainly contains decamethylcyclopentasiloxane. It is colorless, tasteless, essentially odorless and non-greasy.

IOTA D5 A2 is volatile polymethylsiloxane fluids, Mainly contains decamethylcyclopentasiloxane. It is colorless, tasteless, essentially odorless and non-greasy.

IOTA DM5000 – DM60000 is a series of high molecular weight linear polydimethylsiloxane, typically used as conditioning agent for skin and hair formulations.

IOTA DM50 – DM1000 are a series of linear polydimethylsiloxane fluid with a low to medium viscosity and molecular weight.

IOTA DM 10 is a linear polydimethylsiloxane fluid with a low viscosity and low molecular weight.

IOTA EMUL E1P is a micro anionic water emulsion, the solid content is about 40%. It can be widely used in many industrial fields.

IOTA EMUL 360 is a slightly anionic emulsion, the solid content is about 60% which belongs to the general product.

IOTA EMUL 385 is a slightly anionic Dimethylsiloxane emulsion of high viscosity. It can be used in the leather industry as smooth agent, softener in the textile industry, and also could be used as anti-adhesive in rubber or plastic industry.