IOTA DJ330 Hot melt butyl
Product description:
It is a single component, solvent free, no fog,
no cure, with permanent plastic sealing material of hot melt butyl. Products in
a wide temperature range to maintain its plastic and sealing performance, aging
resistance, use of the surface does not crack, maintain the same
hardness. Products on PVC, glass, aluminum, galvanized steel, stainless steel,
concrete and other materials with good adhesion and easy to operate. Due to the
low water vapor transmission rate of the product, an good waterproof
sealing system can be formed with the adhesive material.
Application:
Mainly used for waterproof sealing. Used as a
sealant to form a waterproof sealing system with adhesive materials.
For power battery PACK top and bottom case cover
waterproof sealing, easy to remove.
Color, packing, storage and transporation
Black/gray
Paper sleeve packing:
7kg/sleeve, 14kg/sleeve (could be packed according to customer request)
Storage condition: -10℃～30℃ Cool
and dry place. Shelf life:24 monthes
This product is a non dangerous
goods, can be transported by train, car, ship and aircraft.
Typical product performance (not used as a product standard)
|
No
|
Inspect item
|
Technical index
|
Inspection result
|
Evaluation result
|
|
1
|
Appearance
|
The product should be homogeneous, no visible particles of fine clay
|
The product is fine, homogeneous clay without visible particles
|
Qualified
|
|
2
|
Density
|
1.0-1.5
|
1.17
|
|
3
|
Cold flow value
|
≤5
|
4.3
|
|
4
|
Penetration
|
250℃ 50-90
|
79
|
|
130℃ 450-700
|
511
|
|
5
|
TG
|
≤5
|
2.0
|
|
6
|
shear strength
|
23℃ ≥0.05
|
0.12
|
|
-40℃ ≥0.05
|
0.3
|
|
After UV irradiation ≥0.05
|
0.12
|
