In the textile industry, sewing thread lubrication is a vital process. By using appropriate lubricants, the performance of sewing threads can be significantly improved, including improving sewing efficiency, enhancing tear resistance, preventing thread breakage and thread skipping, thereby improving the overall strength and toughness of the thread. Lubricants can also give sewing threads antistati

  Food-grade silicone grease is a lubricant with many excellent properties. It is corrosion-resistant, does not solidify or disperse in water environments, has good thermal stability and chemical stability, and has extremely low volatility. It is mainly used in high and low temperature environments, requiring lubrication an

Due to the stability of the silicon-oxygen bond and the hydrophobicity of the methyl group, as well as the structural characteristics of the methylsiloxane polymer, methyl silicone oil has good heat resistance. It has a high flash point, is not easy to volatilize, has a low viscosity coefficient, a large compression force, a small surface tension, is chemically stable, has good electrical (insulat

This type of defoamer usually uses polydimethylsiloxane with low surface tension, which is widely used in defoaming in lubricating oil (such as motor oil, transmission oil), oil production, refining and cracking hydrocarbon heavy oil. Low viscosity methyl silicone oil is easy to disperse due to its small surface tension, thus effectively defoaming, but its solubility is high, which affects its

In the production of solar cell modules, bonding and encapsulation are crucial.  1. Bonding and sealing of laminates and frames: Laminates and frames are tightly connected by high-strength adhesives to increase the load-bearing capacity and rigidity of the module, ensure uniform stress distribution, and adapt to thermal deformation and external force deformation. 2. Encapsulati

When using inferior hydroxy silicone oil to produce mixed silicone, the workshop may produce sour smell (fog), large dosage, bad powder, sticking to the roller and other undesirable phenomena. Sometimes methoxy silicone oil or dimethyl ether auxiliary materials need to be added, and production will have safety risks, high volatility, low yield of finished products and other problems. Such mixed

Silicone oil has very low surface tension and unique interfacial properties. Adding a small amount of low-viscosity dimethyl silicone oil to coatings and inks can effectively reduce their surface tension, improve coating and expansibility, and obtain a coating without orange peel and uniform appearance. Compared with traditional coatings, polysiloxane coatings have many excellent properties, s

Silicone oil can be used as a softener, lubricant, waterproof agent, finishing agent, etc. for fabrics in the textile and garment industry. In order to meet the high-end demand for textiles, chemical product manufacturers are also constantly developing silicone oils that can be used in the same bath with various functional additives such as waterproofing agents, flame retardants, antistatic agents

The main production methods of diethoxymethylsilane are: using methylsilane and ethanol as raw materials, condensing the crude product under certain temperature conditions, and then obtaining the finished product through distillation and purification; using methyldichlorosilane and ethanol as raw materials for alcoholysis reaction; using methyldichlorosilane and triethyl orthoformate as raw materi

IOTA-792 is IOTA's 3-aminoethylaminopropyltrimethoxysilane. This product can be used in many fields such as construction and industrial adhesives, sealants, inks and coatings, glass fiber finishing agents, etc. IOTA-792 is suitable for polymers such as thermosetting resins, hot melt resins, elastomer polysulfide rubber, polyurethane rubber, etc. It can be used as a coupling agent to improve the