IOTA EMUL 365 is a non- ionic water emulsion properties, the solid content is about 65%, which belongs to the general product.

IOTA EMUL 361 is a slightly anionic water emulsion properties, the solid content is about 60%, Especially for the release design.

IOTA EMUL 360 is a slightly anionic water emulsion properties, the solid content is about 60%, which belongs to the general product.

IOTA SLT 3E SIV is a one-component silicone sealant, acidic curing, which when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses good resistance to severe weathering conditions.

IOTA SLT 3E is a one-component silicone sealant, acidic curing, which when exposed to atmospheric humidity, forms a flexible and durable elastomeric seal which possesses good resistance to severe weathering conditions.

IOTA 107 V150000-V550000 is straight chained high viscosity polymethylsilanol fluids.

IOTA 107 V5000-V80000 is a medium viscosity linear hydroxyl-terminated polydimethylsiloxane.

IOTA 107 V500-V3000 is straight chained low viscosity polymethylsilanol fluids.

SUPERSOFT IOTA C910 is a high amine content, medium to low viscosity diamino functionalized polydimethyl siloxane, specially developed for formulation to emulsions for textile softening.

EXTRASOFT IOTA C845 is a silicone oil with diamine functions, mainly intended for the formulation of textile finishing emulsions.

ECOSOFT IOTA C803 is a medium to low viscosity diamino functionalized polydimethyl siloxane, specially developed for formulation to emulsions for textile softening and textile resin plasticising.

IOTA GUM 703 is a dimethylsiloxane, methyl vinyl gum with relatively higher vinyl content. It has been especially designed to manufacture HCR with high performance.

Vinyltrimethoxysilane(VTMO) is used as a polymer modifier via grafting reactions. The resulting pendant trimethoxysilyl groups can function as moisture-activated crosslinking sites. The Silane grafted polymer is processed as a thermoplastic and crosslinking occurs after fabrication of the finished article upon exposure to moisture.

3-Aminopropyltriethoxysilane is applied in plastic products (including cables, glassfiber-reinforcement plastics etc.), rubber products, adhesives, coatings, pigments dispersion, inks, magnetic materials (plastic magnet and rubber magnet), metallic casting resins and resins concrete, etc.

3-(2,3-Epoxypropoxypropyl)trimethoxysilane is an epoxy functional silane, it is a clear, light straw liquid. 3-(2,3-Epoxypropoxypropyl)trimethoxysilane may be used as a coupling agent in polysulfide and polyurethane caulks and sealants, in mineral-filled or glass-reinforced thermosets and thermoplastics, and in glass roving size-binders.