Silicone pressure sensitive glue IOTA 600, for the preparation of high temperature under high-performance films and tapes for industrial use fabric glue, could also be used in electrical insulation tape, electronic combination lithography masks, flame and plasma spray masking, electromagnetic interference, radio frequency interference shielding and plastic fight other operations.

Rockwool waterproofing agent IOTA 2002

This product is a new rigid three-dimensional modified silicone waterproof material used in building, mainly composed by methyl silicate.

IOTA 10101 can be used for compounding solvent-based silicone and wax of the type of Stripping-off. It is mainly used for: insulation materials, decoration materials, automotive collision parts, furniture, models, hangers, plastic substitutes and so on. There are MSDS, TDS, and COA data provided separately.

Casting release agent

IOTA 10901 applicable to all kinds of natural rubber and synthetic rubber molding, can play good release properties, may, after printing, the dilution ratio of 50-100 times, when the rubber vulcanization can be partially diluted 150-200 times.

Food-grade silicone, Food-grade silicone oil emulsion, Food grade release agent

Filter release agent IOTA 10303

cement release agent IOTA 11301 is an environmentally friendly concrete release agent, the surface was milky viscous aqueous liquid.

Epoxy release agent IOTA 10801

IOTA 11201 can be used for molding a variety of rubber and silicone, and can exert the good property of leave mold, organic fluorine and the active ingredients of the surface.

IOTA 10501 release agent is compound by a variety of wax, and contents high solids. It is mainly used in car seats, headrests, toys and other PU Rebound.

IOTA 10701 release agent is compounded by a variety of silicones. It has high solid content, and is mainly used for the separation of the PU elastomer resin during molding and curing. It has good release properties. It is used in the PU elastomers, integral skin, shoes, car shock absorbers and other PU product parts.

IOTA 55-NC is another type of IOTA 44-NC with fast evaporation and low odor. The main ingredients of IOTA 55-NC is similar to IOTA 44-NC.Eexcept that there is a litter solvent changed. IOTA 55-NC is your best choice under the application that requires the release agent not to transfer to the surface of the article. This semi-permanent release agent that has non-transfer and the surface of Molds forms a coating layer by a chemical bond, which is stable under most molding temperature conditions. IOTA 55-NC can be used for these materials：Epoxy resins, unsaturated polyester resins, thermoplastics, adhesives and plastics rotational molding.

Automatic crusting matte release agent IOTA 1303